24 HOUR LOCKSMITH SERVICE

Locksmith open 24 hours a day, certified service, company with years of experience, immediate assistance if you have problems opening the door of your house, apartment, car or vehicle or perhaps a safe, the key is broken or it got stuck the key in the lock or padlock, lost the keys, sometimes these inconveniences occur late at night or on Sundays or holidays, being more difficult to find a locksmith that is available 24 hours at home and close to my location , If you are looking for locksmiths available at any time or at any time of the day, you have come to the right place.

On this website you will find a large number of options of certified locksmiths and locksmiths worldwide, wherever you are you will find the ideal service to solve the problems related to your bolt, lock, plate, closure, padlock, latch, handle with fully staff prepared and trained to carry out the task promptly, efficiently and effectively, immediate response times for changes of locks with new keys.

A drum located inside the lock contains small cylinders of different sizes or lengths, when the correct key is inserted the indentations or teeth of the key push exactly to the edge of the drum, this causes the drum to rotate and this allows the key open the lock, but if the wrong key is inserted the cylinders exceed the edge of the drum which prevents it from turning, leaving the lock locked, to guarantee that the locks have a long useful life fulfilling the function of repeated opening and closing times in the same day they are manufactured in a material called zinc which is melted at a high temperature and then deposited in molds, zinc is great for creating large parts but it is not useful for the drum and cylinders, this is Because these parts must give in an easy way, this is why a material called brass is created, to cut the cylinders a machine that is in constant monitoring must be used Orization by a machine, in turn it must be continuously lubricated with oil with this you can proceed to the cut and give the bicel to the cylinders, the machines must be super well calibrated so that it can make cuts of cylinders smaller than 1 cm with differences of 1 thousandth of a millimeter between them.

To make the drilling or holes of the drums, a machine must go through a machine that executes the processes in a very careful way so as not to damage the locks, the drums pass to a belt to be assembled so that as far as possible each lock is unique, batches usually come out with different security levels, for the highest security level batches of 1 million units are manufactured each with a unique key, to ensure that each key corresponds only to the lock with which was manufactured, each one has grooves along the length and a unique combination of edges located at the top, software is used to determine the size and combination of these edges randomly, the more edges it has, the higher the level of security .

Once the keys are cut, the corresponding lock drum is created, to do so, the drum must be filled with cylinders that correspond exactly to the height of the key edges, these intelligent machines automatically identify the key edges and in less than 4 seconds the cylinders of the correct length are placed in the drum

The first option is to look for an element with an extremely sharp point, in this case it can be scissors, with this in many cases it is possible to remove the piece of broken key that is inside the cylinder.

The second somewhat orthodox option is the use of a drill with a very fine bit to make a small die or hole immediately next to the jammed key, then a pointed object is inserted and thus the key can be removed.

Among the locksmith tools there is a master or universal key that will help to open doors that do not contain a cylinder, such as a door lock, this key is multifunctional that has up to 8 tools, allen tip to remove the cradles of armored doors with this the cylinder, has a cone shaped like a square, contains a scale, this key cannot help to determine the cylinder and its cam, normally locksmiths handle several sizes of square keys to do the job.

In many cases it is not necessary to use the drill tool to break the sheet or change the guards, since you can generate the key or change the combination of a lock to save costs without having to change everything, on this website you will find professional experts For this work, the locksmith uses a blank key which is inserted inside the lock and the internal pins are accommodated until it is turned without a key, then a pin is placed and the cylinder containing the internal pins that tells us is removed the key code, the matrix key is taken and configured with its respective guards or pins.